Table of Contents
Advertisement
6 Basic operation
6.1 Required time
After the MSD is turned on, it takes 3 seconds to receive communication command and takes 12 seconds or
longer to receive front panel operation.
Receiving communication command
Receiving operation of front panel
Note: If "7.15.7 Bitmap output at startup (P.93)" is set to "ON", the required time for front panel operation
may be longer than 12 seconds.
6.2 Selecting input channel
Switching mode of input channel can be selected from the top screen or SWITCHING MODE menu.
If you set it from the top screen, use "▲" and "▼ "keys to select the desired mode and press the desired input
channel key.
Top screen
MSD-702
[ V&A ]
Channel switching mode
Example MSD-702
DISPLAY
IN 1
IN 2
POWER
1
2
Example MSD-501
DISPLAY
IN 1
IN 2
POWER
Operation
MENU / SET
▲
ESC
▼
IN 3
IN 4
IN 5
IN 6
IN 7
IN 3
IN 4
IN 5
OFF
[Fig. 6.1] Setting output signal
Required time
3 seconds
12 or longer seconds
OFF
IN3 input signals will be output to OUT1.
OUT 1
IN5 input signals will be output to OUT2.
OUT 2
IN1 input signals will be output.
MSD-501/502/701/702 User's Guide
Video and audio
V&A
simultaneously
VIDEO
Only video
AUDIO
Only audio
23
Advertisement
Table of Contents
