Table of Contents
Advertisement
6 Basic operations
6.1
Selecting input channels
Step 1:
Select the desired mode by the SWITCHING MODE key.
Every time you press the key, the mode changes sequentially as follows:
V&A (video & audio simultaneously; set by default)
VIDEO (only video)
AUDIO (only audio)
The LED of the selected mode illuminates.
Step 2:
Press the desired input channel selection key (IN1 to IN8, or OFF) to set a channel to output video or audio.
The LEDs of the selected video/audio inputs illuminate.
Command control: Switching video and audio channel simultaneously: @SSW/@GSW
Switching video channel: @SSV/@GSV
Switching audio channel: @SSA/@GSA
SWITCHING MODE
V&A
VIDEO
AUDIO
[Fig. 6.1] SWITCHING MODE selection key
25
MSD-804FD User's Guide
Advertisement
Table of Contents
