Table of Contents
Advertisement
8 Basic Operation
8.1
Main power switch and standby key
The rear panel has the main power switch while the front panel includes the standby key.
The power LED of the front panel shows the device's power status.
Status
Power off
Standby
Power on
The MSD power can be controlled from the standby key, RS-232C or LAN during standby state.
Start-up power status can be set in "9.17.1 Power stat".
8.1.1 Power up period
After powering on the MSD, there is some seconds initialization delay before the WEB browser is fully
operational and before the first communication command can be received and executed.
Receiving communication command
Receiving front panel operation
Note:
If "9.16.7 Startup bitmap output" is set to "ON", the required period for the front panel operation may be
longer.
[Table 8.1] Power status
LED
Main power switch
Does not
OFF
illuminate
Illuminates
ON
(orange)
Illuminates
ON
(green)
[Table 8.2] Power up period
Operation
MSD-62 Series User's Guide
Standby key
---
OFF (Does not
illuminate)
ON (Illuminate,
green)
【See: 9.17.1 Power stat】
Period
6 seconds
12 seconds or longer
29
Advertisement
Table of Contents
