Table of Contents
Advertisement
8 Basic operation
8.1 Power
The MSD has the main power switch on the rear panel and the stanby switch on the front panel.
The power status of the MSD can confirm at power LED on front panel.
Power status
Power OFF
Standby
Power ON
When the power status is standby, the MSD power can be controlled by the standby switch, RS-232C, and
LAN.
The status for when the main switch is turned on can be set from "9.15.1 Power switch".
8.1.1 Required time
After the MSD is turned on, it takes 7 seconds to receive communication command and WEB browser
operation and takes 12 seconds or longer to receive front panel operation.
Receiving communication command
Receiving WEB browser operation
Receiving operation of front panel
Note:
If "9.14.7 Bitmap output at startup" is set to "ON", the required time for the front panel operation may be
longer.
[Table 8.1] Power status
Power LED
Main switch
OFF
OFF
ON (Orange)
ON (Green)
[Table 8.2] Required time
Operation
29
MSD-72 Series User's Guide
Stanby switch
---
ON
OFF
ON
ON (Green)
【See: 9.15.1 Power switch】
Required time
7 seconds
7 seconds
12 or longer seconds
【See: 9.14.7 Bitmap output at startup】
Advertisement
Table of Contents
