Menus On The Detector Display - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
Fluorescence Detectors FLD-3100 and FLD-3400RS

5.3 Menus on the Detector Display

Via the menus that are available on the front panel display, you can make several settings
or access information directly from the detector.
For information about the menus, see section 5.3.1 (→ page 58).
Showing the menu key
Four white spots can be found on the front panel below the display. To show the keys,
touch the position of the utmost left spot on the display with the menu pen (part
no. 6300.0100). The menu pen is included in the accessories kit for the UltiMate 3000
autosampler.
Fig. 22: Showing the menu key
The menu key replaces the information in the bottom line of the status screen. Select the
utmost left spot again to call the main menu. If no key is selected, the bottom line of the
status screen is restored after about 5 seconds.
FLD-3400RS
Ex: Em:
244
400
nm
nm
Menu
Fig. 23: Menu key
If the detector is connected with Chromeleon, settings that do not interfere with the
measurement, such as, the screen brightness or contrast, can still be changed from the
display.
Operating Instructions Page 57