Display Screens (Function Keys And Menus); Showing The Function Keys - Thermo Scientific Dionex UltiMate 3000 Series Operating Instructions Manual

UltiMate 3000 Series:
VWD-3100 and VWD-3400RS Variable Wavelength Detectors

5.4 Display Screens (Function Keys and Menus)

Function keys and menus are available on the detector display. Thus, you can make several
settings or execute certain commands directly from the detector.
For information about the function keys, see section 5.4.1 (see further down) and page 67. For
information about the menus, see section 5.4.2.1 (→ page 67).

5.4.1 Showing the Function Keys

Four white spots on the front panel mark the positions of four function keys: Menu,
Wavelength, AutoZero, and Run (or Stop) (→ table further down).
To show the keys, touch the position of the utmost left spot on the display with the menu pen
(part no. 6300.0100). The menu pen is included in the accessories kit for the UltiMate 3000
autosampler.
Fig. 21: Showing the function keys
The function keys replace the information in the bottom line of the status screen. If no key
is selected, the bottom line of the status screen is restored after about 5 seconds.
Wavelength [nm]
254
Menu Wavelength AutoZero Run
Fig. 22: Function keys (here: not connected to Chromeleon)
Page 64 Operating Instructions