Connect To The Chromeleon 7 Client - Thermo Scientific Dionex ICS Series Operator's Manual

Dionex PDA Operator's Manual
3.1.2

Connect to the Chromeleon 7 Client

1. Start the Instrument Controller Service, if it is not already running. If
2. Start the Chromeleon 7 client:
34
the Chromeleon tray icon on the taskbar is crossed out in red
the Instrument Controller Service is not running. To start it, right-
click the icon and select Start Chromeleon Instrument Controller.
The icon changes to gold
Controller Service is starting. When the Instrument Controller
Service is running (idle), the icon changes to gray
If the Chromeleon tray icon is not on the taskbar, click Start > All
Programs > Chromeleon 7 > Services Manager to open the
Services Manager and click Start Instrument Controller.
a. Click Start on the Windows taskbar and select All Programs >
Chromeleon 7 >Chromeleon 7.
b. Click the Instruments Category Bar on the Console.
c. On the Navigation Pane, click the instrument that includes the
detector. The ePanel Set for the instrument appears in the Console
Work Area.
d. To display the detector ePanel, click the UV_Vis tab on the
ePanel Set (see Figure
e. Verify that the Connected check box is selected. If it is not, click
the box to connect the Dionex PDA to Chromeleon 7.
NOTE After starting Chromeleon 7 and connecting to
the ePanel, the
detector's status bar is blue.
to indicate that the Instrument
3-1).
LED on the
Connected
,
.
Doc. 065378-01 1/12