High accuracy workflow
For a high accuracy workflow, perform the following:
Note
It is important to assign all of the substrates used to those that were performed with a machine
LUT.
Normal accuracy workflow
For a normal accuracy workflow, perform the following:
If the consumables are in good condition, perform a machine LUT on one substrate, and
for all screens used.
Note
It is important to assign all of the substrates used to those that were performed with a machine
LUT.
78 Chapter 6 Operating the press
Perform a machine LUT for all substrates used.
Perform a machine LUT for all screens used.
Perform a Color Adjust for each substrate type.
Perform a machine LUT on a weekly basis (50,000 to 150,000 impressions), and/or
when the software recommends it.
Perform a machine LUT on only one, or a few substrate types.
Perform a machine LUT for all screens used.
Do not perform a machine LUT, but instead use the default LUT.
If Color Adjust fails, check that the consumables, such as blanket, PIP, are in good
condition.
ENWW