Black Bid Cleaning Procedure - HP Indigo press 3050 User Manual

Black BID cleaning procedure

Waste may occasionally accumulate in the black BID. This may cause streaks on the
printed page, as shown in the example shown in Figure 16-34.
Leading edge
Figure 16-34. Streaks on print
Follow the procedure, 'Removing the BID unit' on page 222, to remove the black BID.
Perform the BID dry cleaning procedure on the black BID before removing it.
1
Figure 16-35. Black BID on BID stand
2
3
244 Chapter 16 Binary ink developer (BID)
Remove the black BID, and place it on the BID stand (or on the specially designed
BID holder provided with new BID units). Make sure that the BID is positioned facing
you, with the BID motor to the right.
Clean the BID developer roller using imaging oil on a lint-free wipe. Then thoroughly
dry the roller with a lint-free wipe.
Remove the adhesive strip from the BID cleaning foil.
Developer roller
BID motor
ENWW