Refilling The Imaging Oil Tank - HP Indigo press 3050 User Manual

Refilling the imaging oil tank

The imaging oil tank has a capacity of about 15 liters. The imaging oil tank supplies the
ink tanks and the cleaning station with fresh imaging oil. Once the imaging oil tank level
drops below 10 liters, the system displays the following message.
clean imaging oil level is too low
Do not fill the tank while the press is printing. When the warning message appears, there
is enough imaging oil left in the tank for an additional day's work. Wait for the end of the
day or the end of the print job before you refill the imaging oil.
Before you refill the imaging oil tank, you should have a full imaging oil container available.
Refill the imaging oil tank at the end of the day, before performing the end-of-day routine.
Use the following procedure to refill the imaging oil tank:
1
2
Figure 13-2. Oil tank door
3
Figure 13-3. Imaging oil tank
ENWW
Change the press to the Standby state.
Open the imaging oil tank door.
Remove the tank cap.
Imaging oil tank door
Imaging oil tank cap
Imaging oil filters 195