Figure 9-26. Spread 6 (correct rear
pressure)
Spread 5 is the first one to print 3 triangles in the left column and spread 6 is the first to
print in the right column. See Figure 9-22.
Removing the ITM hood
Perform the following procedure to remove the ITM hood and allow access to the cleaning
station, replace the PIP, or allow access for maintenance procedures.
1
2
132 Chapter 9 Blanket
Turn the press off by pressing an Emergency Stop button.
Open the front door and the upper feed door.
Figure 9-27. Spread 7 (too much
pressure)
ENWW