Setting The Timer - HP Indigo press 3050 User Manual

Setting the timer

Remove chiller timer cover. Press the transparent cover up and out.
Figure 19-4. Chiller timer control panel (two models)
Setting time and day
To clear all memory settings, press the following buttons simultaneously:
Use the following procedure to set the current day and time:
1
2
3
4
5
Programming
1
2
3
4
5
6
7
8
Viewing and changing a command
1
2
268 Chapter 19 Chiller
Keep pressing the button during the setting procedure.
Press the d button to set the day. Note the small arrow at the bottom of the display
panel indicating the day of the week. Buttons 1 through 7 correspond to Monday
through Sunday, while 1-7 corresponds to the entire week.
Press the h button to set the hour.
Press the m button to set minutes.
When you have set the day and time, release all buttons. The clock should work and
the semicolon (:) should blink. If unsuccessful, restart.
To start a program entry, press the Prog button. The day arrow indicates Monday. ON
is displayed on the right side of the display panel.
Use the d button to select the desired day. You can program one day at a time or to
program the whole week, select 1-7. The arrow above the selected day flashes.
Press the h button to set the hour.
Press the m button to set the minute.
You have programmed the timer to turn the chiller On. To reset the time, restart the
procedure by pressing the d button.
Press the Prog button. The display panel indicates Off.
Select the hour and minute to turn the chiller Off using the h and the m buttons.
When you have set the On and Off times, press
Press the Prog button to scroll through all the commands in chronological order.
Press the d button to view the next day.
Display panel
Entire week
Days of the week
Always on
,
.
, d, and m.
ENWW