HP Indigo press 3050 User Manual page 154

Figure 11-3. Main tray paper feed unit control pad
You can move the elevator in continuous mode by pressing the Elevator Cont. button,
while pressing the Elevator Up or the Elevator Down buttons. To stop the elevator, press
either the Elevator Up or the Elevator Down buttons again. The up motion stops
automatically as the paper stack reaches the pre-set height.
Secondary tray paper transport control pad
Use the control pad to control the following movements on the secondary tray:
Figure 11-4. Secondary tray paper feed unit control pad
You can move the elevator in continuous mode by pressing the Elevator Cont. button,
while pressing the Elevator Up or the Elevator Down buttons. To stop the elevator, press
either the Elevator Up or the Elevator Down buttons again. The up motion stops
automatically as the paper stack reaches the pre-set height.
Blower suction control pad
The blower suction control pad exists on both the main and secondary (see Figure 11-2).
Use the control pad to control the following movements:
ENWW
reverse inch the paper feed unit (elevator and conveyor only)
move the paper elevator up and down
Elevator Up
Elevator Cont.
Elevator Down
inch the paper feed unit
reverse inch the paper feed unit
move the paper elevator up and down
unlock the side walls when loading a new substrate
Elevator down
Elevator up
Side wall lock
Paper Feed
Inching Forward
Inching Reverse
Paper Feed
Inching forward
Paper transport control pads 153