Table of Contents
Advertisement
Overview
The press cleaning station is located behind the front door, next to the PIP drum (see
Figure 14-2). The cleaning station cools the PIP and cleans it after the first transfer. It
does this by wetting the PIP with imaging oil and removing the ink debris with a flexible
blade.
You should clean the cleaning station blade periodically, and replace it when it is
damaged.
Cleaning the cleaning station blade
Before performing this procedure, you should have the following items:
Clean the cleaning station blade at the end of each day. Use the following procedure to
clean the cleaning station blade:
1
2
3
Figure 14-1. Front door
202 Chapter 14 Cleaning station
imaging oil
lint-free wipes
Change the press to the Standby state.
Press an Emergency Stop button.
Open the front door.
Front door
Emergency Stop
button
Work table
ENWW
Advertisement
Table of Contents
Troubleshooting
