Adjusting The Front Static Guide And Rear Jogger - HP Indigo press 3050 User Manual

Adjusting the front static guide and rear jogger

The rear jogger pushes the sheet against the front static guide to ensure cross-run
registration. It pushes the sheet as it is aligned against the head stopper. Adjust the front
static guide and the rear jogger so that the sheet is aligned to the center of the press. The
press is equipped with a scale to facilitate sheet alignment.
Figure 11-27. Front static guide and rear jogger
The steps below show how to adjust the front static guide to align substrate in the press.
1
2
3
Center mark on
paper width
scale
Figure 11-28. Front static guide
168 Chapter 11 Paper transport
Guide knobs
Lift up the secondary conveyor of the Paper Feed Unit.
Open the ball drive cover, and lift up the ball drive frame.
Open the guide knob on the front static guide, and move the front static guide all the
way to the front of the press.
Front of press
Rear jogger
Paper feed direction
Front static guide
Side knobs for
parallel alignment
Guide knob on front
static guide
Ball drive frame
Sheet
Paper feed
direction
ENWW