3
Figure 11-61. Air knife
4
5
6
7
Figure 11-62. PIP–air knife nip
8
9
ENWW
Disconnect the air knife connector.
Disconnect both air hoses.
Disconnect the electrical connector.
Press the air knife latch and pull the unit out.
You can now access the PIP. Remove any loose paper shreds.
Re-install the air knife by following the steps above in reverse order.
Release the Emergency Stop button.
Removing paper shreds under the air knife 187
Number 5
electrical
connection
Air knife latch
Number 4 air
hoses
PIP surface (check
this area for paper
shreds)
Impression drum