HP Indigo press 3050 User Manual page 248

3
Figure 16-40. Ink Flow Calibration – Adjust Ink Flow window
4
5
6
7
Ink cans
Figure 16-41. Ink cabinet (safety door in operating position)
8
9
ENWW
Click the Flow Detection button.
Open and close the valve until the bar is in the center of the green area. The location
of the valve is described below, under 'Setting the ink pump flow rate' on page 248.
Opening the flow valve will shorten the flow time, and closing the flow valve with
lengthen it.
The wizard will instruct you how to open or close the valve.
Open the ink cabinet door.
Check the required ink tank. When the ink pump is on, you can see the ink stirring. If
the pump is not on, call your customer engineer.
Close the ink cabinet door.
BID troubleshooting 247