HP Indigo press 3050 User Manual page 119

13 Clean the ITM drum with a lint-free wipe dampened with imaging oil. To clean all
Installing a new blanket
1
2
3
Figure 9-8. Blanket window (Replace Blanket tab)
4
Figure 9-9. Remove plastic covering from the adhesive side
118 Chapter 9 Blanket
sides, advance the ITM drum intermittently with the Inching button. Imaging oil dries
rapidly. Wipe off any residue oil before it dries.
After cleaning the ITM drum, advance the machine so that the ITM slot is in view.
On the control panel, click the Consumables menu, and select Blanket. The Blanket
window opens.
Click Imp Engage. The impression drum engages with the ITM drum.
Place the new blanket adhesive-side-up on the work table. Remove the plastic
covering from the adhesive side.
Click here to
engage the ITM
drum to the
impression drum
Plastic covering
ENWW