Replacing The Damper - HP Indigo press 3050 User Manual

Replacing the damper

Perform the following procedure after replacing a corona wire.
1
2
3
4
Figure 15-7. Scorotron dampers
5
6
Figure 15-8. Scorotron damper
7
8
216 Chapter 15 Scorotron
Remove the scorotron unit.
Remove the grids.
Remove the bobbin cover.
Release the Phillips screw, removing the damper clamp and the damper.
Phillips screw
Discard the damper.
Install the new damper in the same orientation as the old one.
Place the clamp on top of the damper and secure it with the Phillips screw.
Reassemble the scorotron unit in reverse order. Install the unit and lock it.
Damper clamp Damper
ENWW