HP Indigo press 3050 User Manual page 171

17 Adjust the side knob for the front static guide so that the flat spring is parallel to the
18 Repeat steps 6 through 8.
19 When the paper is aligned with the scale, the rear jogger is closest to the front, and
Figure 11-31. Flat spring pushed by paper
20 Lock the front static guide knob.
170 Chapter 11 Paper transport
You have a choice of three different flat springs to use, depending on the tension
desired:
• Soft – up to 135 g/m
• Medium – 135 to 250 g/m
• Hard – 250 to 350 g/m
paper.
touches the paper, move the front static guide until its flat spring is pushed 2 mm
(0.078 inch) by the edge of the paper.
Flat spring
2
(90 lb text/50 lb cover) stock paper
2
(90 lb text/50 lb cover to 94 lb cover) stock paper
2
(94 to 130 lb cover) stock paper
Paper
2 to 3 mm
(0.078 to 0.118 inch)
ENWW