It is possible to proof more than one copy to the sample tray. Click Options, and Press
Configuration to obtain the Press Configuration window. Select Job Handling, and
Default Parameters to obtain the window containing the Proof Properties panel.
Figure 11-37. Multiple copies proofing
Accessing the impression drum area
Some maintenance procedures are performed at the impression drum area. Use the
following procedure to access the impression drum:
1
2
3
I S T E R - 3 5 7
T W
Figure 11-38. Releasing the duplex conveyor
ENWW
Press an Emergency Stop button.
Open the door below the input conveyor.
Press the duplex conveyor cover to release its latch. Lower the duplex conveyor. The
impression drum is accessible.
Select to proof more than one
copy to the sample tray
Accessing the impression drum area 175