HP Indigo press 3050 User Manual page 120

5
Figure 9-10. Insert the pins in slots in the ITM drum
6
Figure 9-11. Press the blanket against the ITM drum
7
8
9
10 Click the Replace Blanket tab.
11 In the Serial No field, type the new serial number.
ENWW
Insert the metal fastener bar pins into the slots in the ITM drum. Press the leading
edge of the blanket against the drum so that it is flush with the surface.
Press the Inching button to advance the machine. Keep the trailing edge stretched so
that no air bubbles become trapped under the blanket.
Check for evenness of the blanket by advancing the ITM drum an additional revolution
while pressing it with a lint-free wipe soaked in imaging oil.
Close the ITM hood, and then close the service doors.
On the control panel, click the Consumables menu, and select Blanket. The Blanket
window opens.
Replacing the blanket 119