HP Indigo press 3050 User Manual page 192

2
Figure 12-1. Grippers Cleaning window
3
4
5
Figure 12-2. Impression paper holder
ENWW
On the Maintenance menu, select Gripper Cleaning. The Grippers Cleaning window
opens.
Advance the press using the handwheel until you see the grippers and impression
paper holder. You can reach the impression drum from the input side at this angle.
Loosen the two low head screws in the front of the impression paper holder, and pull
out the old impression paper. Dispose of the old impression paper.
Advance the drums using the handwheel and check the impression drum for
cleanliness. Pay special attention to the leading and trailing edges. If necessary, use a
lint-free wipe and IPA to clean the impression drum.
Using the handwheel, bring the impression paper holder into view (195 to 200°).
Impression paper holder
Low head screws
Impression drum surface
Replacing the impression paper 191
Gripper window
(lower side)