Reusing The Bid Unit; Storing The Bid Unit; Reinstalling A Bid Unit - HP Indigo press 3050 User Manual

2
3
4
5
6
Note Attach a printed sample if available, showing the problem.
7
8
9

Reusing the BID unit

Store the BID unit for future use when you replace an ink.

Storing the BID unit

1
2
Figure 16-18. Cleaning the developer roller
3
4
5

Reinstalling a BID unit

1
ENWW
Remove the new BID from the box and container (Figure 16-17). Do not throw the
container or box away. They will be used to return an old BID.
Open the sealed bag containing the new BID.
Install the new BID in the press.
Insert the old BID in the specially provided bag. Seal the bag.
Insert the bag in the container.
Fill the BID Return Feedback Form and attach it with the BID.
Insert the container in the box.
Return the box to HP Indigo using the Return Materials Application (RMA) procedure.
Perform the BID removal procedure. See 'Removing the BID unit' on page 222.
Place the BID unit on the BID stand and use a 3-mm Allen key to rotate the developer
roller clockwise, as viewed from the front of the BID unit.
Insert an Allen key here and
turn clockwise
If a BID washer is available, use it to clean the BID. If not, use a lint-free wipe soaked
in imaging oil to wipe the surface of the developer roller and the squeegee roller. Keep
rotating the rollers until the surfaces of both the rollers are clean.
Wrap the BID unit in a sealed plastic bag.
Place the unit on a BID stand (or on the specially designed BID holder provided with
new BID units).
Remove the BID unit from the sealed plastic bag.
Squeegee roller
Developer roller
Reusing the BID unit 229