Sample tray configuration
The Sample Tray window provides you with new options for configuring the handling of
substrates. Click Consumables, Substrate, and select the Sample Tray tab to open the
Sample Tray window,
Figure 11-36. Substrate window
174 Chapter 11 Paper transport
Select Single duplicated
sheet to produce a single
duplication.
One copy – will print one copy from the printed job.
Number of sheets – will print only the defined number of sheets.
Duplication – will print to both the main and sample trays. In this
mode, a few prints may pass before the duplicated page arrives at
the sample tray.
Select to print more than
one copy to the sample
tray.
Select to print jobs that
exceed the tray maximum
capacity
Select to produce prints as
long as this radio button is
selected—in this case, no
duplication will be allowed.
ENWW