Adjusting Bid Engage/Disengage - HP Indigo press 3050 User Manual

Adjusting BID engage/disengage

1
2
Figure 16-23. Select correction type
3
4
Figure 16-24. Calibrate BID Engage/Disengage window
ENWW
On the control panel, click the Adjustments menu, and then select BID Engage. The
Calibrate BID Engage/Disengage window opens
If the leading edge is uneven, select the Engage - check leading edge check box. If
the trailing edge is uneven, select the Disengage - check trailing edge check box. If
both Leading and Trailing edge are uneven, select both check boxes.
On the control panel, click Get Ready.
After the press reaches the Ready state, click Next. The second step of the wizard
opens.
Adjusting the BID engage and disengage angle 233