Adjusting Paper Tray Guides - HP Indigo press 3050 User Manual

2
90° angle
Figure 11-17. Sheet separator
Setting suction fingers
1
Figure 11-18. Suction fingers valves
2

Adjusting paper tray guides

1
2
162 Chapter 11 Paper transport
Check that all sheet separators form a 90° angle between the sheet separator and its
bracket. If needed, replace a sheet separator. See 'Replacing the sheet separators on
the Paper Feed Unit' on page 181.
Close all vacuum valves on fingers outside the paper format.
Vacuum valve (closed)
Disable the suction by pulling the valve up.
Close the stack centering knob until the side guides touch the stack (Figure 11-15).
On the control pad, press the Elevator Up button together with the Elevator Cont.
button. The elevator stops when it reaches the correct height.
Sheet separator
Sheet separator
bracket
Sheet separator set
screw
Vacuum valve (open)
ENWW