13 Place the BID on the BID stand.
Figure 16-9. BID stand
Installing the BID unit
1
2
CAUTION
Use only your fingers to remove the protective paper sheet!
Figure 16-10. New BID
3
Figure 16-11. Removing the developer protective cover
4
ENWW
Remove the new BID unit from its case and place it on the packaging provided, or on
a BID stand.
The developer roller is wrapped with a protective paper sheet fastened with adhesive
tape. Using your fingers, carefully peel off the adhesive tape. Do not leave paper
fibers on the developer
Insert a 3-mm Allen key into the developer gear slot and turn clockwise.
Keep rotating the developer until you have removed the protective cover completely.
Adhesive tape
Developer roller
BID stand
BID stand
Developer protective cover
Insert a 3-mm Allen key here and turn
clockwise
Replacing the BID 225