Adding Imaging Agent; Decreasing Ink Conductivity - HP Indigo press 3050 User Manual

Adding imaging agent

Ink conductivity is monitored by the system. Imaging agent is added automatically from
the imaging agent container.
Note The following warning message appears when the imaging agent container is empty:
Some of the ink tank is not reaching the desired conductivity. Add
imaging agent.
Perform the following procedure to add imaging agent:
1
Figure 8-11. Imaging agent access door
2
3

Decreasing ink conductivity

Use the following procedure to decrease ink conductivity when prompted by the system:
1
2
Figure 8-12. Inks Properties window
ENWW
Open the imaging agent access door on the right side of the ink cabinet.
Imaging agent
container inside
ink cabinet
Fill the imaging agent bottle shown in Figure 8-11 through the imaging agent access
door.
Close the imaging agent access door.
Press an Emergency Stop button.
On the control panel, click the Diagnostics menu, and select Ink. The Inks
Properties window opens.
Imaging agent
access door
outside ink
cabinet
Adjusting ink conductivity 107