Stage 3: Printing The Full Run - HP Indigo press 3050 User Manual

5
Distance from left
margin to image is
equal throughout
the run
Figure 6-10. Cross-run registration
6
7
8
9
10 If there is a time delay between proof approval by the customer and the actual full run,

Stage 3: Printing the full run

1
Figure 6-11. Print mode selector
2
3
ENWW
If the job is a multi-sheet job, make sure that the image placement is the same for all
the job sheets.
Check for color values. Compare a previous print or a proof, if available. To increase
and decrease color values, access Color Match tab or Job LUT in the Job Properties
window.
Check image integrity, full ink coverage, right sheet sequence, and same image
placement for all jobs.
If changes other than Job Properties are required (for example, wrong image, typos,
and so on), notify the supervisor or customer.
Print a second proof and evaluate it.
print one proof immediately before the beginning of the full run print to make certain it
matches the approved proof.
If the control panel print mode selector is set on Continuous, the job is unloaded at the
end of the print run and the next job in the Print Queue starts the print process. If the
control panel print mode selector is set on Step, the next job in the Print Queue is
moved to the top of the Print Queue and appears in the currently printed job field. The
machine state changes to Ready.
Make certain the required substrate type for the subsequent job is loaded on the
press.
Print a proof.
Distance from leading
edge to image is
equal throughout the
run
Printing jobs 59