PIP drum
PIP groove
Cleaning
paper
Figure 10-14. Drying the PIP holder slit
13 Thoroughly wash the PIP underlayer installation jig with imaging oil to clean the jig's
14 Install sleeves on each end of the PIP underlayer installation jig.
Figure 10-15. PIP underlayer installation jig
15 Install the jig with sleeves at the cleaning station position via the slots on the side
Figure 10-16. Mounting the PIP underlayer installation jig
144 Chapter 10 PIP
surface.
walls.
PIP drum
PIP
underlayer
installation jig
Sleeves
ENWW