Turning the press on and off
Turning the press on
1
Figure 6-1. Main circuit breaker and Power Enable switch
2
Turning the press off
1
Figure 6-2. Shutdown window
2
54 Chapter 6 Operating the press
Turn on the main circuit breaker at the rear of the machine and wait for the
control panel to appear on the screen (this may take several minutes).
Main circuit breaker
When a prompt appears, press the Power Enable switch on the input side of the
press. The press is now in Standby state.
On the control panel, click the System menu, and then select Shutdown. The
Shutdown window appears.
Select an option and click OK. Wait for the computer to completely shut down, which
may take a few minutes, and then turn off the main circuit breaker at the rear of the
machine. The system is now shut down.
Power Enable switch
ENWW