Adjusting The First Friction Wheels - HP Indigo press 3050 User Manual

3
Figure 11-25. Conveyor belt holders (conveyor underside)
4
Central belts
Figure 11-26. Align belts with belt knobs (overview)
5
6
7

Adjusting the first friction wheels

1
ENWW
Move the belt holder to the desired position on the conveyor underside.
On both the feed and exit sides of the conveyor, pull the belt to the desired position.
Verify that the belts are evenly distributed across the sheet and that all the belts are
parallel to each other.
Return the conveyor table to its working position.
Push the conveyor latch down to secure it.
Place the steel strips on top of the two external belts.
Move the two friction wheels over the two central belts (Figure 11-26).
Turn knob to adjust belt
placement
Pull or push belts to
align with belt knobs
on the conveyor
underside
Friction wheels
Adjusting the conveyor belts 167