Installing The Cleaning Station; Sponge Roller Replacement - HP Indigo press 3050 User Manual

Installing the cleaning station

1
Figure 14-11. Cleaning station (facing the PIP)
2
3
4
5
6
7
8

Sponge roller replacement

1
Pulley
Front
coupling
Front locking
plate
Timing belt
Figure 14-12. Sponge roller assembly
208 Chapter 14 Cleaning station
Insert the cleaning station. Slide the cleaning station studs into the cleaning station
grooves on the press inside walls.
Cleaning station studs
Lock the cleaning station latch.
Connect the cleaning station connector to the cleaning station.
Replace the ITM hood. Insert the side facing the rear wall first.
Lock the ITM hood.
Replace the cleaning station blade. See Figure 14-4.
Release the Emergency Stop button.
Resume work.
Remove the cleaning station (see 'Removing the cleaning station' on page 206).
Cable /
imaging oil
connector
ENWW