HP Indigo press 3050 User Manual page 206

5
Press here to remove or insert
a cleaning station blade
Figure 14-5. Remove cleaning station blade
6
Figure 14-6. Cleaning station blade (section)
ENWW
Hold the cleaning station blade housing and press the metal bars, as shown in Figure
14-5. This releases pressure on the blade. Pull the blade out.
Cleaning station blade
Each blade has four numbered edges. Install the edges in order. For example, if edge
#1 was in use, turn to #2, and so on. If edge #4 was in use, replace the wiper. Install
the blade into the holder, making sure that you do not angle the blade while pushing it
into position.
Edge number 2
Blade edge number
Cleaning station knob
Edge number 1
Edge number 4
Rotating and replacing the cleaning station blade 205
Edge number 3 (hidden)