Shifting Separations; For Simplex Printing; For Duplex Printing - HP Indigo press 3050 User Manual

Shifting separations

The separation placement procedure shifts the selected separation vertically in relation to
the other separations. Perform this procedure to overcome registration problems.
Perform this procedure after replacing a blanket. Seasoned blankets require less
separation shifting.
You can shift any separation if your user level is set to Supervisor or higher.

For simplex printing

1
2
Figure 9-18. Blanket window
3
4
5

For duplex printing

1
2
3
4
5
6
126 Chapter 9 Blanket
On the control panel, click Pause. The press changes to the Pause state.
On the Consumables menu, click Blanket. The Blanket window opens.
Click the Shift tab.
Adjust the separation placement for all simplex sheets by entering the required value
in the available field for simplex printing. Alternatively, select the value by sliding the
lever or using the spin buttons.
Click Apply to accept the changes and leave the window open, or click OK to accept
the changes and close the window.
On the control panel, click Pause. The press changes to the Pause state.
On the Consumables menu, click Blanket. The Blanket window opens.
Click the Shift tab.
Adjust the simplex side for duplex jobs by entering or selecting the required value
using the options available for simplex printing.
Adjust the required separation placement for the duplex side of duplex jobs by
entering or selecting the required value using the available options for duplex printing.
Click Apply to accept the changes and leave the window open, or click OK to accept
the changes and close the window.
ENWW