HP Indigo press 3050 User Manual page 123

Recovering the blanket surface
Perform this procedure whenever a paper jam occurs. Immediately check for paper or ink
residues on the blanket. Residues can damage the blanket if not removed immediately,
while the blanket is still hot.
The following procedure depends on the time elapsed since the paper jam occurred to the
time the Print Cleaner function is activated. If there is no delay and no impression paper
replacement is required, use the following procedure to clean the blanket:
1
2
Otherwise, manually clean the blanket before activating the Print Cleaner function. The
press displays a message when manual blanket cleaning is required.
Use the following procedure to recover the blanket surface:
1
WARNING! The blanket is very hot and may cause injury if handled carelessly. Access the blanket area with
care. Avoid imaging oil vapors.
2
Figure 9-14. Blanket scraper
3
4
5
6
7
122 Chapter 9 Blanket
On the control panel, click the Maintenance menu, and then select Print Cleaner.
The Print Cleaner wizard opens.
Select the Jam Handling check box.
Press an Emergency Stop button.
Immediately remove any jammed paper from the machine. Use a blanket scraper if
needed.
If any paper remains on the blanket, remove it carefully while the blanket is still hot. If
this does not work, soak a folded lint-free wipe in clean imaging oil and apply it to the
paper edge. Remove the paper from the blanket in one piece if possible.
Use the following procedure to check the impression paper for dirt or crawling:
a Release the Emergency Stop button.
b Advance the press using the Inching button. Keep rotating the drums and inspect
the impression paper. Pay close attention to the leading edge of the impression
paper. Replace it if it is dirty, torn, or out of position. See 'Replacing the
impression paper' on page 190.
Lock the input conveyor in its place and close the ITM hood.
Click Get Ready.
On the Maintenance menu, select Print Cleaner. The Print Cleaner wizard opens.
ENWW