Display - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Instrument
power button

Display

This section describes the front-panel display of the Model 708B and the bottom display of the Model
707B.
During operation, the display provides information about the selected channel, channel pattern,
channel state, and errors. You can press DISPLAY to cycle between the display of the channel or
pattern, the closed channel list, or a screen message.
During setup, the display shows menu choices that you can use to configure the instrument.
Display during operation
During operation, the display shows the control status (local or remote) and the current channel, and
indicates if any channels are closed. An example is shown below.
If REM is not displayed, control is through the front panel.
The control status is shown in the upper left corner of the display. If REM is displayed, the instrument
is being controlled remotely (through GPIB, LAN, or USB).
707B-901-01 Rev. A / August 2010
Figure 14: Model 708B front panel
DISPLAY
POWER
CONFIG
Display
Change Change scan
screen
and channel
displays
attributes
Remote control
indicator
REM
CLS:1A01
Closed channels
(<none> if no channels
are closed)
LAN
KEITHLEY
MODEL 708B
Navigation
NOTE
Slot and row
Column
2A+01
Section 2: General operation
708B SWITCHING MATRIX
wheel
2-13