Slot[X].Poles.four - Keithley 708B Reference Manual

Section 7: Command reference
For pseudocards, the response is Pseudo, followed by the model number, description, firmware revision, and
??? for the serial number.
Example
print(slot[1].idn)
Also see
slot[X] attributes

slot[X].poles.four

This attribute indicates if a four-pole setting is supported for the channels on the card.
Type TSP-Link accessible
Attribute (R) Yes
Usage
fourPole = slot[X].poles.four
fourPole
X
Details
This attribute only exists if a card is installed and if the card supports four-pole settings for the channels on the
card. If not, the value is nil. If supported, the value is 1.
Example
fourPole3 = slot[3].poles.four
print(fourPole3)
Also see
slot[X].poles.one
slot[X].poles.two
7-170
If a Model 7173 card is installed in slot 1, the response is:
7173,4x12 Hi Freq Matrix AAAA,02.01a,99999999
(on page 5-15)
Affected by
Not applicable
The return value
Slot number (1 to 6)
(on page 7-171)
(on page 7-171)
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Not applicable Not applicable
Queries if Slot 3 supports four-pole settings
for the channels on the card.
Output if card supports four pole:
1.000000000e+00
Output if card does not support four pole:
nil
707B-901-01 Rev. A / August 2010