Status.system - Keithley 708B Reference Manual

Section 7: Command reference
Example 2
-- decimal 17 = binary 0001 0001
standardRegister = 17
status.standard.enable = standardRegister
Also see
Event summary bit (ESB register)

status.system.*

These attributes manage the status model's TSP-Link system summary register for nodes 1 through 14.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
enableRegister = status.system.condition
enableRegister = status.system.enable
enableRegister = status.system.event
enableRegister = status.system.ntr
enableRegister = status.system.ptr
status.system.enable = enableRegister
status.system.ntr = enableRegister
status.system.ptr = enableRegister
enableRegister
7-190
Models 707B and 708B Switching Matrix Reference Manual
(on page C-9)
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The system event register's status in decimal form. A zero (0) indicates no bits set
(also send 0 to clear all bits). Other decimal values indicate various bit settings.
Sets the OPC and EXE bits of the
standard event status register using a
decimal value.
Where saved Default value
- - - -
Not saved Not applicable
Not saved 0
Not saved 0
Not saved 0
Not saved 32767 (All bits set)
707B-901-01 Rev. A / August 2010