Status.system2 - Keithley 708B Reference Manual

Section 7: Command reference
Example 1
enableRegister = status.system.NODE11 +
status.system.NODE14
status.system.enable = enableRegister
Example 2
-- decimal 18432 = binary 0100 1000 0000 0000
enableRegister
status.system.enable = enableRegister
Also see

status.system2.*

System summary bit (System register)
status.system2.*
These attributes manage the status model's TSP-Link system summary register for nodes 15 through 28.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
enableRegister = status.system2.condition
enableRegister = status.system2.enable
enableRegister = status.system2.event
enableRegister = status.system2.ntr
enableRegister = status.system2.ptr
status.system2.enable = enableRegister
status.system2.ntr = enableRegister
status.system2.ptr = enableRegister
enableRegister
7-192
= 18432
(on page 7-192)
(on page C-5)
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The system event register's status in decimal form. A zero (0) indicates no bits set
(also send 0 to clear all bits). Other decimal values indicate various bit settings.
Models 707B and 708B Switching Matrix Reference Manual
Sets BIT11 and BIT14 of the status
system enable register set 1 using
constants.
Sets BIT11 and BIT14 of the status
system enable register set 1 register
using a decimal value.
Where saved Default value
- - - -
Not saved Not applicable
Not saved 0
Not saved 0
Not saved 0
Not saved 32767 (All bits set)
707B-901-01 Rev. A / August 2010