Tspnet.timeout; Tspnet.tsp.abort() - Keithley 708B Reference Manual

Section 7: Command reference

tspnet.timeout

This attribute sets the timeout value for the tspnet.connect(), tspnet.execute(), and tspnet.read()
commands.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
value = tspnet.timeout
tspnet.timeout = value
value
Details
This attribute sets the amount of time the tspnet.connect(), tspnet.execute(), and tspnet.read()
commands will wait for a response.
The time is specified in seconds. The timeout may contain fractional seconds, but is only accurate to the nearest
10 ms.
Example
tspnet.timeout = 2.0
Also see
tspnet.connect()
tspnet.execute()
tspnet.read()

tspnet.tsp.abort()

This function stops remote instrument execution.
Type TSP-Link accessible
Function Yes
Usage
tspnet.tsp.abort(connectionID)
connectionID
Details
Sends an abort command to the remote instrument.
The specified connection must be valid and available.
7-236
Affected by
System reset
The timeout duration in seconds (0.01 s to 30.0 s)
(on page 7-229)
(on page 7-230)
(on page 7-232)
Affected by
Integer value used as a handle for other tspnet commands
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Create 20.0
configuration script
Sets the timeout duration to two seconds.
Where saved Default value
707B-901-01 Rev. A / August 2010