Lxi Page - Keithley 708B Reference Manual

Section 2: General operation
Generate Report: This generates an instrument report you can use to:
•
Review card or instrument information, including a basic description, the firmware revision, and the
serial number.
•
Review configuration information, including card configuration and number of poles.
•
Review the number of closures for each channel on the selected slots. The counts reported for the
following cards indicate the number of closures since the last power cycle of the card:
•
•
•
•
•
For all other cards, the number of closures are the closures that have occurred over the lifetime of the
card.
To print the report, click Print.
To clear the report information from the screen, click Clear.

LXI page

The Model 707B or 708B is an LXI Class C instrument. The LXI page is a read-only page that
displays the LXI information about the instrument.
IP Config
The IP Config allows you to review and change the LAN connection information.
See Change the IP configuration through the web interface
Log page
The event log records all LAN[0-7] triggers generated and received and can be viewed over any
command interface, including the web interface. The following figure shows the view of the LAN[0-7]
event log from the embedded web interface.
Up to 32 LAN[0-7] events are logged and shown on this page. The event log is circular and rolls over
after 32 events are captured. The LAN[0-7] events correspond to the lan.trigger[1-8] subsystem.
2-84
7072
7072-HV
7173-50
7174A
Models 707B and 708B Switching Matrix Reference Manual
(on page 2-56) for more information.
707B-901-01 Rev. A / August 2010