Trigger.timer[N].Passthrough; Trigger.timer[N].Reset() - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual

trigger.timer[N].passthrough

This attribute enables or disables the timer trigger passthrough.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
passthrough = trigger.timer[N].passthrough
trigger.timer[N].passthrough = passthrough
passthrough
N
Details
When enabled, triggers are passed through immediately and initiate the delay. When disabled, a trigger only
initiates a delay.
Also see

trigger.timer[N].reset()

trigger.timer[N].reset()
This function resets some of the trigger timer settings to their factory defaults.
Type TSP-Link accessible
Function Yes
Usage
trigger.timer[N].reset()
N
Details
The trigger.timer[N].reset() function resets the following attributes to their factory defaults:
•
trigger.timer[N].count
•
trigger.timer[N].delay
•
trigger.timer[N].delaylist
•
trigger.timer[N].passthrough
•
trigger.timer[N].stimulus
It also clears trigger.timer[N].overrun.
707B-901-01 Rev. A / August 2010
Affected by
System reset
Trigger timer N reset
Passthrough:
•
True: Enabled
•
False: Disabled
Trigger timer number (1 to 4)
(on page 7-211)
Affected by
Trigger timer number (1 to 4)
Where saved Default value
Create False
configuration script
Where saved Default value
Section 7: Command reference
7-211