Status.node_Event; Status.operation - Keithley 708B Reference Manual

Section 7: Command reference
Bit
Binary value
Decimal
Weights
Example
nodeEventRegister = status.node_event
print(nodeEventRegister)
Also see
status.condition
status.system.*
Status byte and service request (SRQ)

status.operation.*

These attributes manage the status model's operation register set.
Type TSP-Link accessible
Attribute - -
.condition (R) Yes
.enable (RW) Yes
.event (R) Yes
.ntr (RW) Yes
.ptr (RW) Yes
Usage
operationRegister = status.operation.condition
operationRegister = status.operation.enable
operationRegister = status.operation.event
operationRegister = status.operation.ntr
operationRegister = status.operation.ptr
status.operation.enable = operationRegister
status.operation.ntr = operationRegister
status.operation.ptr = operationRegister
operationRegister
7-178
B7 B6
0/1 0/1
128 64
7 6
(2 ) (2 )
(on page 7-173)
(on page 7-190)
(on page C-15)
Affected by
- -
Not applicable
Status reset
Status reset
Status reset
Status reset
The operation event register's status in decimal form. A zero (0) indicates no bits set
(also send 0 to clear all bits). Other decimal values indicate various bit settings.
Models 707B and 708B Switching Matrix Reference Manual
B5 B4 B3
0/1 0/1 0/1
32 16 8
5 4 3
(2 ) (2 ) (2 )
Reads the status node event register.
Sample output: 1.29000e+02
Converting this output (129) to its binary
equivalent yields: 1000 0001
Therefore, this output indicates that the set bits
of the status byte condition register are presently
B0 (MSB) and B7 (OSB).
Where saved Default value
- - - -
Not saved Not applicable
Not saved 0
Not saved 0
Not saved 0
Not saved 22528 (All bits set)
B2 B1 B0
0/1 0/1 0/1
4 2 1
2 1 0
(2 ) (2 ) (2 )
707B-901-01 Rev. A / August 2010