Scan.trigger.channel.clear(); Scan.trigger.channel.set() - Keithley 708B Reference Manual

Section 7: Command reference

scan.trigger.channel.clear()

This function clears the channel event detector.
Type TSP-Link accessible
Function Yes
Usage
scan.trigger.channel.clear()
Details
This function clears the channel event detector of the trigger model (sets it to the undetected state).
Example
scan.trigger.channel.clear()
Also see

scan.trigger.channel.set()

scan.trigger.channel.stimulus
Trigger model
scan.trigger.channel.set()
This function sets the channel event detector to the detected state.
Type TSP-Link accessible
Function Yes
Usage
scan.trigger.channel.set()
Details
This function sets the channel event detector of the trigger model to the detected state.
Example
scan.trigger.channel.set()
Also see
scan.trigger.channel.clear()
scan.trigger.channel.stimulus
Trigger model
7-156
Affected by
(on page 7-156)
(on page 7-157)
(on page 3-1)
Affected by
(on page 7-156)
(on page 7-157)
(on page 3-1)
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Clears the channel event detector.
Where saved Default value
Sets the channel event detector of the trigger
model to the detected state.
707B-901-01 Rev. A / August 2010