Digio.trigger[N].Assert(); Digio.trigger[N].Clear() - Keithley 708B Reference Manual

Models 707B and 708B Switching Matrix Reference Manual
Also see
Digital I/O port
digio.readbit()
digio.writebit()
digio.writeport()

digio.trigger[N].assert()

This function asserts a trigger on one of the digital I/O lines.
Type TSP-Link accessible
Function Yes
Usage
digio.trigger[N].assert()
N
Details
The set pulsewidth determines how long the trigger is asserted.
Example
digio.trigger[2].assert()
Also see
digio.trigger[N].pulsewidth

digio.trigger[N].clear()

This function clears a trigger event on a digital I/O line.
Type TSP-Link accessible
Function Yes
Usage
digio.trigger[N].clear()
N
Details
The event detector of a trigger recalls if a trigger event has been detected since the last
digio.trigger[N].wait() command. This function clears the event detector of a specified trigger line,
discards the previous history of the trigger line, and clears the digio.trigger[N].overrun attribute.
707B-901-01 Rev. A / August 2010
(on page 2-7)
(on page 7-55)
(on page 7-64)
(on page 7-65)
Affected by
Digital I/O trigger line (1 to 14)
(on page 7-60)
Affected by
Digital I/O trigger line (1 to 14)
Where saved Default value
Asserts a trigger on digital I/O line 2
Where saved Default value
Section 7: Command reference
7-57