Tsplink.state; Tsplink.trigger[N].Assert() - Keithley 708B Reference Manual

Section 7: Command reference

tsplink.state

This attribute describes the TSP-Link online state.
Type TSP-Link accessible
Attribute (R) Yes
Usage
state = tsplink.state
state
Details
When the instrument is powered on, the state is offline. After tsplink.reset() is successful, the state is
online.
Example
state = tsplink.state
print(state)
Also see
tsplink.node (on page 7-215)
tsplink.reset()

tsplink.trigger[N].assert()

This function simulates the occurrence of the trigger and generates the corresponding event ID.
Type TSP-Link accessible
Function Yes
Usage
tsplink.trigger[N].assert()
N
Details
The set pulse width determines how long the trigger is asserted.
Example
tsplink.trigger[2].assert()
Also see
tsplink.trigger[N].clear()
tsplink.trigger[N].mode
tsplink.trigger[N].overrun
7-218
Affected by
Not applicable
TSP-Link state, online or offline
(on page 7-217)
Affected by
The trigger line (1 to 3)
(on page 7-219)
(on page 7-220)
(on page 7-221)
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Not applicable Not applicable
Read the state of the TSP-Link. If it is online, the
output is:
online
Where saved Default value
Asserts trigger on trigger line 2.
707B-901-01 Rev. A / August 2010