Keithley 708B Reference Manual page 38

Models 707B and 708B Switching Matrix Reference Manual
The CONFIG key accesses attribute menus in which you can configure channels and scans.
CONFIG and then CHAN opens the Channel Attribute Menu.
CONFIG and then SCAN opens the Scan Attribute Menu.
Keys
The top row of keys under the display allows you to open and close channels, work with scan lists,
and load and run scripts.
Key descriptions
Key
OPEN ALL
STEP
OPEN
CLOSE
LOAD
RUN
INS
DEL
Also see:
•
For detail on using OPEN ALL, STEP, OPEN, and CLOSE:
page 2-94).
•
For detail on using LOAD and RUN:
•
For detail on using INS and DEL:
The bottom row of keys allow you access menus and set up channels, patterns, cards, scans,
triggers, and general instrument operation.
707B-901-01 Rev. A / August 2010
Figure 19: Models 707B and 708B top row of keys
Description
Opens all closed channels.
If a scan list has been defined, press STEP to step through the list.
Each press is one scan step. See
3-5).
Opens the selected channel or channel pattern.
Closes the selected channel or channel pattern.
Loads code or scripts that can be run from the front panel.
Runs the last code or script selected through the LOAD key.
Appends the selected channel or channel pattern to the scan list.
Deletes the first occurrence of the selected channel or channel
pattern from the scan list.
Load Test menu options
Front-panel scanning
Figure 20: Bottom row of keys
Section 2: General operation
Basic scan procedure (on page
Closing and opening channels
(on page 2-21).
(on page 3-6).
(on
2-19