Print(); Printbuffer() - Keithley 708B Reference Manual

Section 7: Command reference
Note that each node independently sets its operation complete bits in its own status model. Any nodes not
actively performing overlapped commands will set their bits immediately. All remaining nodes will set their own
bits as they complete their own overlapped commands.
For additional information, see Status Model.
Also see
waitcomplete()

print()

This function returns the value of the argument.
Type TSP-Link accessible
Function No
Usage
print(value1)
print(value1, value2)
print(value1, ..., valueN)
value1
value2
valueN
Details
TSP-enabled instruments do not have inherent query commands. Like any other scripting environment, the
print() command and other related print() commands generate output. The print() command creates
one response message.
Example
x = 10
print(x)
Also see
None

printbuffer()

This function prints data from tables or reading buffer subtables.
Type TSP-Link accessible
Function No
7-138
(on page 7-243)
Affected by
The first argument to return
The second argument to return
The last argument to return
Affected by
Models 707B and 708B Switching Matrix Reference Manual
Where saved Default value
Example of an output response message:
1.0000000e+01
Note that your output might be different if you set
your ASCII precision setting to a different value.
Where saved Default value
707B-901-01 Rev. A / August 2010